Additional Functions - AEG VS92903M User Manual

Hide thumbs Also See for VS92903M:
Table of Contents

Advertisement

Available languages

Available languages

ENGLISH
11
MARINATING IN THE POUCH
Use the ON/OFF switch
left of the control panel to switch the
appliance on.
Select one of the programs between P1
and P5 with vacuum at 99.9% and sealing
time set at 2 seconds, using keys
.

9. ADDITIONAL FUNCTIONS

9.1. P6 "External vacuum"
This program must be used to
eliminate the air inside special air-tight
containers (not supplied with this
product).
Unscrew the intake fitting placed
inside the tank
Tighten the "external vacuum" fitting
Connect this fitting to the container
using the intake pipe.
With the open cover, start the
program by pressing Start
This program allows only the "vacuum"
program to be set.
located to the
and
Place the food with the marinade inside
the pouch. Place the pouch inside the
tank.
Close the cover and press Start
Open the cover, as soon as the display shows
the program (e.g. P1).
Store in the refrigerator for 9-12 hours
9.2. P7 "Conditioning Program"
This program must be used in the
following situations:
Before using the machine for the first
time.
After a long stop period.
After having sealed products with
high humidity content (e.g. soups).
When you notice a decrease in
performance of the machine (e.g.:
time to reach vacuum is increased or
it does not reach it at all).
This program lasts about 3 minutes
and ensures a complete cleaning of
the pump, removing any liquid
emulsion that might be found in the oil.
Do not seal any product while this
program is running.
This program has no set variables.
Follow the indications below to start
the program:Close the cover with the
empty tank
Select program P7 using keys
.
and
.
Press Start
Wait for the cycle to end (about 3
minutes).
At the end of the cycle, the display
shows P7 again.
Now the machine is ready for use
.

Advertisement

Chapters

Table of Contents
loading

Table of Contents