Table of Contents
Advertisement
VigorAccess Installation Guide
3
.
4
.
2
S
c
e
n
a
r
i
3
.
4
.
2
S
c
e
n
a
r
A master device can manage up to six slave devices. Certainly it can be used standalone
without managing any slave device. In such condition, it can connect and control 24
ADSL CPE routers with DB-21 cable through MDF connection.
In the above picture, the user of PC-3 wants to use phone and access the Internet at the
same time; yet PC-1 and PC-2 just want to access the Internet through the Master device.
As for the connection, please follow the steps below:
1.
Connect PC-3 to number 9 of MDF-1, PC-2 to number 5 of MDF-1 and PC-1 to
number 1 of MDF-1 with Ethernet cable.
2.
Connect the MDF-1 to Line port of the Master device.
3.
Connect the Phone port of the Master device to the matching connector (in this case,
it is number 9, be careful and not to misconnect) to MDF-2 which will be connected
to PSTN. This step is just useful for PC-3 for the user wants to call out through the
Master device.
4.
Connect the Master device and ISP with Fiber cable through UP-G port.
5.
With such connection, all the users of the PCs can access the Internet through UP-G
connector of the Master device. Yet only PC-3 can call out with a telephone set
directly.
The standalone Master device can connect 24 ADSL CPE routers which supported by the
DB-21 cables. If you want to expand the usage for more users, we recommend you to
purchase and add one Slave device. As to one Master device and one Slave device, at
least there are 48 ADSL CPE routers can be controlled by the Master device and can be
connected to outside Internet via the Master device. Please refer to next scenario for the
Master and Slave devices connection.
20
o
–
M
a
s
t
e
r
D
e
v
i
i
o
–
M
a
s
t
e
r
D
e
v
i
c
e
S
t
a
n
d
a
l
o
n
e
c
e
S
t
a
n
d
a
l
o
n
e
Advertisement
Table of Contents
