Casio DT-X200 Series Software Manual page 161

(4) Run Copy Devices
The terminal automatic searched for counterpart terminals and connects with them (automatic
pairing), then the following Copy Process screen is displayed.
Parent unit Run screen (green)
No. Item
1 "Name"
2 "FROM"
3 "To"
4
"Status"
5
"Transferring file"
6 "Transfer progress"
7 File transfer progress
8
"Copy mode"
9
"Exit" button
※ 1 After the Exit button is pressed, it takes some time (around 10s) for the tool to close.
Operation
Displays the group name specified on the Group
Name Settings screen.
Displays the parent unit MAC address.
Displays the duplicate MAC address.
Displays the communication status.
Displays the file name currently being transferred.
Displays the amount of progress, as transferred
files relative to all files to be transferred.
Displays the rate of progress within the file currently
being transferred.
Displays the copy mode (Normal or Ripple) on the
local terminal.
*1
The receive process is interrupted and the tool
closes.
Duplicate Run screen (blue)
161
Key
operation
-
-
-
-
-
-
-
-
-