Table of Contents
Advertisement
6.2.3 Network adapter fails at driver installation.
Cause 1:
Drivers are not installed correctly.
Solutions:
To correct this error, re-install the drivers for the network adapter. Refer to your
Windows documentation for information on how to do this.
If you have tried all of the above with no success, then it may be that the network
card is not functioning correctly. You must then check your network card. Refer to
the Appendix for instructions on how to do this.
Cause 2:
The network adapter is not installed correctly.
Solutions:
To correct this:
1 Ensure that the network adapter is installed in the computer.
2 If the network adapter still cannot be found, remove the adapter and then re-
6.2.4 AirStation IP address is not assigned
If you are unable to assign the IP address it could be due to the following reason:
Cause 1:
An invalid password has been entered.
Solutions:
To correct this, ensure that the password entered corresponds to the password set
for the AirStation Pro.
65 Troubleshooting
WLA-AWCG User Manual
For instructions on how to do this, refer to
"Network adapter installation" on page 29.
install it.
Refer to your Windows documentation for instructions on how to do this.
AirStation Pro Installation,
Advertisement
Table of Contents
