Table of Contents
Advertisement
2.2.2 Software requirements
The AirStation Pro requires the following software to operate:
The AirStation Manager and Client Manager software is provided on the AirStation
Series Driver CD. For instructions on installing the software see:
Initial setup
To connect all the hardware supplied with the AirStation Pro pack and set up the
system, follow these steps.
1 Connect the AirStation Pro to a power supply, using the AC/DC power
2 Connect one end of the straight-through cable to the AirStation Pro LAN port.
3 Connect the cable to the PC/Hub.
Connecting directly to a PC
Connect the other end of the cross-over cable directly to your PC.
WLA-AWCG User Manual
Warranty Card
Antenna connector
Windows 95/98/ME, NT or 2000
Internet Explorer 4.0 or higher, or Netscape Navigator 4.0 or higher
Internet Explorer is installed as standard on Windows 98 and Windows 2000.
AirStation Manager software
Client Manager software (if you have a Wireless Client)
"Installing the AirStation Manager Software" on page 33
Refer to the WLI-PCM-L11 Wireless LAN card User Manual.
adapter.
Do not use any adapter other than that which is supplied with the AirStation
Pro.
The AirStation Pro power light will display green.
The procedure for this step differs, depending on whether you are connecting
the AirStation Pro directly to a PC or to a hub.
Getting Started 8
WLA-AWCG User Manual
Advertisement
Table of Contents
