Table of Contents
Advertisement
As shown in the diagram above, the AirStation Pro has four LED indicators, each
indicator relaying important information to the user. This information is described
in the following table:
POWER
WIRELESS
ETHERNET (Wired
LAN)
DIAGNOSTICS
Table 6: LED indicator function
Diagnostic Indicator
Each flash of the Diagnostic indicator conveys a particular error message. These
are as follows:
1
2
3
4
5
9
Table 7: Diagnostic indicator information
23 Product Overview
WLA-AWCG User Manual
When the AirStation Pro is connected to a power supply, the LED
indicator will display green continuously.
When the AirStation Pro is successfully connected to a Wireless
LAN, the LED indicator will flash green.
When the AirStation Pro is connected to a 100Base-TX/10Base-T,
the LED indicator will flash.
10Mbps: Indicator will flash orange.
100Mbps: Indicator will flash green.
This light will flash when an error has occurred. The flashing fre-
quency indicates the error type, see
page 23
RAM check error
ROM check error
Ethernet LAN error
Wireless LAN error
Clock error
Error other than above
"Diagnostic Indicator" on
Cannot read or write to the internal mem-
ory.
Cannot read or write to the flash ROM.
The Ethernet LAN controller is broken.
The Wireless LAN controller is broken.
The Clock is not set correctly or the clock
battery may be depleted.
Advertisement
Table of Contents
