Table of Contents
Advertisement
Note: Running winipcfg allows you to check the IP address of all network
adapters.
Windows NT & Windows 2000
1 On the Start menu, select Programs, Command Prompt.
For Windows 2000, select Programs, Accessories, Command Prompt.
2 Enter ipconfig /all at the command prompt.
3 Press the Enter key.
The IP information is displayed.
Ethernet adapter Local Area Connection
IP address
Subnet Mask
Connection-specific DNS Suffix Description
Physical Address
DHCP Enabled
Default Gateway
DNS Servers
Figure 25: IP information
Note: Running ipconfig /all allows you to check the IP address of all
network adapters.
: 195.100.100.52
: 255.255.255.0
: MELCO WL1-PCM-L11 Wireless LAN
Adapter
: 00-60-1D-1F-36-23
: Yes
: 192.168.0.1
: 192.168.0.1
AirStation Pro Installation 32
WLA-AWCG User Manual
Advertisement
Table of Contents
