Resetting The Wireless Settings To Factory Defaults; Cannot Print Over Wireless Network - Dell V313 User Manual

•
The correct printer port is selected.
•
The computer and printer are both connected to the same wireless network.
•
The printer is located away from obstacles or electronic devices that could interfere with the wireless signal.
Make sure the printer and wireless access point are not separated by poles, walls, or support columns containing
metal or concrete.
Many devices can interfere with the wireless signal, including baby monitors, motors, cordless phones, security
system cameras, other wireless networks, and some Bluetooth devices.

Resetting the wireless settings to factory defaults

1
From the printer control panel, press
2
Press the arrow buttons to scroll to Network Setup, and then press
3
Press the arrow buttons to scroll to Reset Network Adapter to Factory Defaults, and then press
.
4
Press the arrow buttons to scroll to Yes, and then press
The printer wireless settings are reset to factory default settings. To verify, print a network setup page.

Cannot print over wireless network

If you encountered problems while installing, or if your printer does not appear in the printers folder or as a printer
option when sending a print job, then you can try uninstalling and reinstalling the software.
Before you reinstall the software, check the troubleshooting checklist, and then do the following:
M
AKE SURE YOUR COMPUTER IS CONNECTED TO YOUR WIRELESS ACCESS POINT
)
ROUTER
•
See if you have access to the Internet by opening your Web browser and accessing any site.
•
If there are other computers or resources on your wireless network, then check to see if you can access them
from your computer.
M
OVE THE COMPUTER AND
Although the possible distance between devices in 802.11b or 802.11g networks is 300 feet, the maximum range
for optimal performance is generally 100-150 feet.
M
OVE YOUR ACCESS POINT AWAY FROM OTHER ELECTRONIC DEVICES
There may be temporary interference from electronic devices such as microwave ovens or other appliances,
cordless phones, baby monitors, and security system cameras. Make sure your access point is not positioned too
closely to these devices.
M
AKE SURE THAT YOUR COMPUTER AND PRINTER ARE CONNECTED TO THE SAME WIRELESS
NETWORK
If the printer is not on the same wireless network as the computer, you will not be able to print wirelessly. The SSID
of the printer must match the SSID of the computer, if the computer is already connected to the wireless network.
.
/
OR PRINTER CLOSER TO THE WIRELESS ROUTER
Troubleshooting
89
.
.
(
WIRELESS