Assembly - Makita EM408MP Original Instruction Manual

EM409MP
► 1. Cap 2. Pipe 3. Protector (narrow type)
4. Cutter
Correct combination of the cutting tool and the protector
CAUTION:
Always use the correct combination of cutting tool and protector. The wrong
protector may not protect you from flying debris and stones. It can also affect the balance of the tool
and result in serious personal injury.
Model
EM408MP
EM409MP
1
2
3
4
Cutting tool
Metal blade
(with nut, cup, and clamp washer)
Nylon cutting head
Nylon cutting head

ASSEMBLY

WARNING:
adjusting the equipment, switch off the
motor and remove the spark plug cap or
battery cartridge. Otherwise the cutting tool
or other parts may move and result in serious
injury.
WARNING:
blade, wear protective gloves. During the
assembly or adjustment, your fingers may
contact with the cutting blade and it may cause
serious injury.
WARNING:
ing the equipment, always put it down.
Assembling or adjusting the equipment in an
upright position may result in serious injury.
WARNING:
precautions in the chapter "SAFETY
WARNINGS" and the instruction manual of
the power unit.
Protector (universal type)
Protector (universal type) with protec-
8 ENGLISH
Before assembling or
Before handling cutting
When assembling or adjust-
Follow the warnings and
Protector
tor extension
Protector (narrow type)