Configure Blf; Extension Settings - Cisco 8851 User Manual

Make sure that you replace Hostname or IP Address from this example with your PBXware's
'Hostname' or 'IP address'.
Click Submit and wait 35 seconds. The phone may reboot.
The auto-provisioning process will start during the phone's reboot process. The phone will pick
up an appropriate configuration file from PBXware. If everything is done as described above,
you should have successfully registered your phone to PBXware.

Configure BLF

This section describes how to configure BLF (Busy Lamp Field) for Cisco 8851.

Extension Settings

Log in to the PBXware's web administration interface
Open a new browser window and enter the IP address in order to access the PBXware's web
administration login page. Example: http://192.168.1.10.
Log in to PBXware with the e-mail address and password.
Edit an Extension
On the Extensions page, click the Edit icon corresponding to your Extension.
Click Advanced Options.
Navigate down to the Auto Provisioning and Presence group of settings.
Make sure that Auto Provisioning is set to Yes.
Make sure that Presence is set to "Yes".
Click Save.
Click Enhanced Services.
Click the Directory/BLF List check box.
Click the Save button in order to enable this feature.
Click the Directory/BLF List Edit button.
Enter the user Extension number.
Click the BLF check box.
Click Save.
Retrieved from "http://wiki.bicomsystems.com/Cisco_8851"
Disclaimers - About Bicom Systems Wiki