Maintenance; Optional Accessories - Makita XTR01 Instruction Manual

A
Changing knob type grip to bar type
grip
To install the bar type grip on the plunge base, loosen
the screw of the knob type grip, then remove the knob
type grip, and then install the bar type grip by tightening
it.
► 1 . Knob type grip 2. Screw 3. Bar type grip

MAINTENANCE

CAUTION:
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE:
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
1 2
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
•
•
•
•
•
•
•
•
•
•
•
3
•
•
•
•
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
18 ENGLISH
Always be sure that the tool is
Never use gasoline, benzine, thinner,
These accessories or attachments
Straight and groove forming bits
Edge forming bits
Laminate trimming bits
Straight guide assembly
Trimmer guide assembly
Trimmer base assembly
Plunge base assembly
Offset base assembly
Grip attachment
Templet guide
Collet cone 1/4"
Collet cone 3/8"
Wrench 13
Wrench 22
Makita genuine battery and charger