Visual Studio 2005 - Casio IT-9000 Series Quick Start Manual

6.2 Visual Studio 2005

The procedures for remote-debug using IT-9000 in the development of VB.NET and/or C#
application are described in this section.
Follow the steps in Chapter 5 "Connecting IT-9000 to PC" before checking the steps below to
confirm that you can connect to IT-9000 from Visual Studio 2005.
1. Establish connection with the IT-9000 via ActiveSync.
2. Open the application project for VB.NET or C# in Visual Studio 2005.
3. Click the button shown in the red box below (see Figure 6.1) to make sure that Visual Studio
2005 has recognized the connection established with the IT-9000 via ActiveSync. If it does not,
start up ActiveSync again to establish connection.
Figure 6.1
4. Choose IT-9000 Device in the pull-down menu box.
Figure 6.2
5. You will now be able to deploy solutions and also debug applications on the attached IT-9000
using the Visual Studio 2005 debugging features.
49