Casio IT-9000 Series Quick Start Manual page 37

3. On IT-9000, in Control Panel, choose the PC Connection option. Confirm that PC
Connection is set to "USB Default". If not, choose 'USB Default' and tap OK button.
Figure 5.18
4. When IT-9000 is mounted on the USB Cradle, a menu to prompt to install the driver is displayed.
Follow the same steps in Chapter 5.1.1.
Figure 5.19
After driver installation is completed,
- Check "Allow USB connections" in ActiveSync. (See Figure 5.17)
- Dismount the device from the cradle and mount the device on the cradle again.
Caution
- When you turn the USB interface switch on/off, be sure to remove IT-9000 from the Cradle.
- Make sure not to shirt the feeding terminals. Shirting circuit of the terminals may cause the
defect.
- Don't give any vibration or mechanical shock to the USB interface during communication. If
you do so, it may cause communication malfunction.
- When you set IT-9000 on the Cradle, be sure to securely set it to the fixing hooks on the cradle
and check the power indicator LED on the front of the cradle lights on. Improper setting may
cause malfunction of communication and/or may not charge the battery.
37