Connection Via Ethernet Cradle - Casio IT-9000 Series Quick Start Manual

5.4 Connection via Ethernet Cradle

This chapter describes how to establish a high speed LAN connection with the cradle (HA-L62IO).
Follow the steps below:
1. Connect the dedicated AC adapter to the cradle in the steps described in [Cradle HA-L62IO
Connection].
2. Connect one end of the network cable to the Ethernet cradle and the other end to the network hub.
3. Make sure the selector switch on the back of the HA-L62IO Ethernet cradle is set to the position
"LAN".
4. Place IT-9000 in the cradle and navigate to Start → Settings → Control Panel → Network
and Dial-up Connections.
5. The following screen appears. Double click the AX887721 icon. The icon will not appear unless
the terminal is placed in the cradle.
Figure 5.25
6. The following TCP/IP screen appears. Set up all the parameters in IP Address and Name
Servers tabs as required and click OK button.
Figure 5.26
7. If the connection is established correctly, the icon ( ) in the Taskbar changes to ( ).
44