Casio IT-9000 Series Quick Start Manual page 41

If EAP-TLS radio button in Authentication field is selected, click the EAP-Properties button that
appears when selecting the EAP-TLS radio button to set the following settings.
Table 5.5
Parameters in
EAP-Properties screen
User name
Certificate
Domain
Validate server
certificate
3. Click WLAN tab.
Figure 5.22
Table 5.6
Field / Radio
Buttons
Adapter power
Power save
Standard
RSSI Level for
initiating roaming
Input a user name in alphanumeric (maximum 100
alphanumeric).
Select a client certificate installed already (maximum
100 alphanumeric).
Search button in the field will display a list of
installed client certificates. Select one by highlighting
it.
Input in alphanumeric (maximum 100 alphanumeric) None
Set up the requisition for server certificate.
With check mark
Without check mark : certificate is not required.
On Enable power to the integrated WLAN module.
Off Disable power to the integrated WLAN module.
Enable Enable power save mode for the WLAN module.
Disable Disable power save mode for the WLAN module.
b Set up IEEE802.11b standard effect.
b/g Set up IEEE802.11b/g standard effect.
No roaming Set up "-100 dBm" for roaming starting threshold level,
a level where communication via WLAN is practically
impossible, so that roaming should not be carried out.
Default Set up "-78 dBm" for the roaming starting threshold
level.
High Set up "-72 dBm" for roaming starting threshold level,
for faster (more frequent) roaming
Description
: certificate is required.
Description
41
Default
None
None
Certificate is required.
Default
Yes
Yes
Yes
Yes