Casio IT-9000 Series Quick Start Manual page 25

Connect a USB cable (DT-380USB) to the USB client port on the back of the cradle, and then
connect the other end of the cable to the PC. USB host port is used when connecting the cradle
with other USB peripheral devices.
8. Align the USB cradle mount holes on the back of IT-9000 with the mount hooks on the cradle
after aligning the power/signal contacts on the bottom of IT-9000 with the power/signal contacts
of the cradle. The power LED on the front of the cradle will light green if IT-9000 has been
properly mounted.
Status of Indicator 1 on IT-9000
Orange
Red
Green
Notes:
• Always remove IT-9000 from the cradle when switching the selector switch on the cradle.
• Never short the power/signal contacts of the cradle. This damages the cradle.
• Do not subject IT-9000 and cradle to vibration or impact during communication. This results in
communication being interrupted.
• When mounting IT-9000, securely attach it to the mount hooks of the cradle and check that the
power LED on the front of the cradle lights green. Charging the battery pack or communication
will not proceed if it is not mounted properly.
: Charging
: Standby due to battery pack error or the surrounding temperature is out of the range (charging
begins when the temperature returns within the correct range.)
: Charging complete
25