Setting A Wash Program; Changing A Wash Program - Baumatic BDWS59SS User Manual

Setting a wash program

Make sure that the "before first use" section has been
followed.
o Check whether the appliance needs rinse aid or salt adding to it.
o Pull out the top and bottom baskets, then load them in accordance
with the loading instructions.
o Push the top and bottom baskets fully back into position.
o Add detergent
o Turn the appliance on by using the ON/OFF button.
IMPORTANT: Wait for 5 seconds before pressing the program
selection button, otherwise the appliance may not function
correctly.
o Press the program selection button to choose an appropriate wash
program for the load that you are washing. The relevant program
indicator neon will light to show which program you have selected.
o Select any program options that you want to use (e.g. delay start).
o Close the door firmly, so that you hear the door lock click shut.
o After a few seconds, you will hear the appliance begin to fill with
water and the wash program will have started.
Changing the wash program
IMPORTANT: This should only be attempted when the cycle has
only just started, otherwise the detergent tablet may have
already released or you could have hot water escaping.
o Slightly open the door of the appliance.
o Wait for a minute before fully opening the door to ensure the spray
arms have stopped working, and to avoid scalding.
o Press and hold down the program selection button for 3 seconds to
cancel the wash program. Then use the program selection button to
choose the correct wash program.
o Select any program options that you want to use (e.g. delay start).
o Close the door firmly, so that you hear the door lock click shut.
21