Adjusting The Tension Of The Door Spring - Baumatic BDWS59SS User Manual

Adjusting the tension of the door spring

o The door of the dishwasher is attached to springs. These are set
at the factory to ensure that they are at the proper tension, so
that the door can open and close smoothly.
o After the furniture door has been fitted, you will need to adjust
the tension of the door spring.
o Fully open the appliance door to allow access to the adjusting
screws.
o Using a spanner or similar tool, rotate the adjusting screws
which are located on the front top corners of the appliance, to
either tighten or slacken the steel cable.
o The doors spring tension is correct when:-
a) The door remains horizontal when in the fully opened
position.
b) You are able to shut the door easily, by raising the door using
your fingers.
o WARNING: If you do not adjust the tension of the door spring,
then it could cause damage to the appliance.
33