At The End Of A Wash Program; Adding An Item To The Wash; Setting A Delay Start - Baumatic BDWS59SS User Manual

o After a few seconds, you will hear the appliance begin to fill with
water and the wash program will have started.

At the end of a wash program

o A buzzer will sound six times.
o Use the ON/OFF button to switch the dishwasher off.
o We would advise waiting for at least a few minutes before unloading
the dishwasher to avoid handling items which will still be very hot
and more susceptible to breakage. Items will also dry better if they
are left for longer in the dishwasher before unloading.
o Open the door of the appliance and unload the dishwasher.

Adding an item to the wash

NOTE: If you open the door during a wash cycle the machine
will pause. When you close the door the machine will continue
working after 10 seconds.
o Slightly open the appliance door and wait for the spray arms to stop
working. This will avoid scalding by hot water.
o Fully open the door and add your required item to the basket.
o Close the door. The appliance will resume the wash after 10
seconds.

Setting a delay start

It is possible to delay the start of the wash program for up to a
maximum of 24 hours. The delay can be set in 1 hour intervals.
o Check whether the appliance needs rinse aid or salt adding to it.
o Pull out the top and bottom baskets, then load them in accordance
with the loading instructions.
o Push the top and bottom baskets fully back into position.
o Add detergent
o Close the door firmly, so that you hear the door lock click shut.
o Turn the appliance on by using the ON/OFF button.
22