Setting A Wash Program - Baumatic BYDI630 User Manual

Rapid A shorter
wash for
lightly soiled
loads that do
not need
drying.
*EN 50242. This programme is the test cycle.
* The wash program times that are quoted are intended as a guide
only. Please note that factors external to the machine, e.g. the
temperature of your water supply, your water pressure etc. can affect
the time it takes for the wash program to complete.

Setting a wash program

Make sure that the before first use section has been
followed.
o Check whether the appliance needs rinse aid or salt adding to it.
o Pull out the top and bottom baskets, then load them in
accordance with the loading instructions.
o Push the top and bottom baskets fully back into position.
o Add detergent.
o Turn the appliance on by using the ON/OFF button (1). The
power light will turn on.
o IMPORTANT: Wait for 5 seconds before pressing the
program selection button, otherwise the appliance may
not function correctly.
o Press the program selection button (4) to choose an appropriate
wash program for the load that you are washing. The relevant
program indicator neon (5) will light to show which program you
have selected.
o Close the door firmly, so that you hear the door lock click shut.
o After a few seconds, you will hear the appliance begin to fill with
water and the wash program will have started.
Wash
(40°C) 20 g
Rinse
Rinse
(40°C)
30 0.5
minutes
11
22