Setting A Wash Program; Changing A Wash Program - Baumatic BDW65S Instruction Manual

Setting a wash program

o Check whether the appliance needs rinse aid adding to it.
o Pull out the top and bottom baskets, then load them in
o Push the top and bottom baskets fully back into position.
o Add detergent.
o Close the door firmly, so that you hear the door lock click shut.
o Turn the appliance on by using the ON/OFF button (1).
o IMPORTANT: Wait for 5 seconds before pressing the
o Press the program button (4) repeatedly to choose an
o Select any program options that you want to use (e.g. delay
o After a few seconds, you will hear the appliance begin to fill with
Changing the wash program
o A program which has just begun can be changed if it has only
o To stop the current program, press the start/pause button (6).
Downloaded from www.Manualslib.com
Make sure that the before first use section has been
followed.
accordance with the loading instructions.
program selection button, otherwise the appliance may
not function correctly.
appropriate wash program for the load that you are washing.
The relevant program icon will light to show which cycle has
been selected.
start or half load). Press the start/pause button (6) to begin the
program.
water and the wash program will have started.
been running for a short time. Otherwise, the detergent may
have already been released and will need to be refilled or the
machine may have already filled with hot water.
manuals search engine
23