Linksys
Scheduler Association
Associate defined scheduler profiles with SSIDs.
Figure 26: Scheduler Association Screen
Data - Scheduler Association Screen
Wireless Radio
Select the desired radio from the list.
Radio 1 is for 2.4 GHz, and Radio 2 is for 5 GHz.
Scheduler Association
SSID
The index of SSID.
SSID Name
The name of the SSID.
Profile Name
Choose the profile that is associated with the SSID.
If the profile associated with the SSID is deleted, then the
association will be removed.
Option "None" means no scheduler profile is associated.
Interface Status
The status of the SSID. It can be Enabled or Disabled.
Scheduler only works when the SSID is enabled.
Connection Control
Exclude or allow only listed client stations to authenticate with the access point.
Figure 27: Connection Control Screen
Data - Connection Control Screen
SSID
Select the desired SSID from the list.
Control Type
Select the option from the drop-down list as desired.
Local
•
Choose either "Allow only following MAC addresses
to connect to wireless network" or "Prevent following
MAC addresses from connection to wireless network. "
You can enter up to 20 MAC addresses of wireless
stations or choose the MAC address.
RADIUS
•
Primary/Backup RADIUS Server - Enter the IP address
of the RADIUS Server.
•
Primary/Backup RADIUS Server Port – Enter the Port
number of the RADIUS Server.
•
Primary/Backup Shared Secret - This is shared
between the wireless access point and the RADIUS
Server while authenticating the device attempting
to connect.
Disabled
CHAPTER 2 Access Point Setup
21