Linksys
CHAPTER 1 Quick Start Guide
Package Contents
•
Linksys Wireless Access Point
•
Quick Start Guide
•
Ethernet Cable
•
AC Power Adapter
•
CD with Documentation
•
Mounting Bracket
•
Mounting Kit
•
Ceiling Mount Back Plate
•
Drilling Layout Template
Physical Details
There is one LED for the device
LED
LED Color
Activity
Green
Blinking
Solid
Blue
Blinking
Solid
Red
Solid
Port and Button
Power Port - Connect the AC power adapter to this port
NOTE: Use only the adapter that came with your access point
Ethernet Port - Connect a wired network device to this port This port supports
PoE (Power over Ethernet) with a PoE switch or PoE injector LAPAC1750 can be
powered on from an 802 3at(PoE+) compliance source
NOTE: When both PoE and AC power adapter are connected to access point,
device will get power from PoE as higher precedence
Using Cat5e or better cable is highly recommended
Reset Button - Press and hold this button for less than 15 seconds to power
cycle device Press and hold for longer than 15 seconds to reset the device to
factory default settings
CHAPTER 1 Quick Start Guide
Status
System is booting
System is normal; no wireless device
connected
Software upgrade in process
System is normal; at least one wireless
device connected
Booting process or update failed; hard
reset or service required
1
1