Linksys
Setup Wizard
The first time you connect to the wireless access point, run the Setup Wizard to
configure the device
1
Click the Quick Start link on the main menu
Figure 2: Setup Wizard
2
On the first screen, click Launch
3
Set the password on the Device Password screen, if desired
4
Configure the time zone, date and time for the device on System Settings
screen
Figure 3: Setup Wizard - System Settings
5
On the IPv4 Address screen (Figure 4) configure the IP address of the device
then click Next If you want to configure more than 4 SSIDs, please go to
Configuration → Wireless → Basic Settings The access point supports up
to 8 SSIDs per radio
Figure 4: Setup Wizard - IPv4
Set the SSID information on the Wireless Network screen Click Next
6
Figure 5: Setup Wizard - Wireless Network
7
On the Wireless Security Screen (Figure 6) configure the wireless security
settings for the device Click Next If you are looking for security options that
are not available in the wizard, go to Configuration → Wireless → Security
page The access point supports more sophisticated security options there
CHAPTER 2 Access Point Setup
4