Configure Universal Plug And Play (Upnp) - NETGEAR CG3000Dv2 User Manual


To configure the switch ports:
1. In the main menu, under Advanced, select LAN Switch.
2. For each port, select the appropriate speed and duplex setting.
3. Click Apply.

To disable a LAN port:
1. In the main menu, under Advanced, select LAN Switch.
2. In the Auto column corresponding to the port you want to disable, clear the check box.
3. Click Apply.

Configure Universal Plug and Play (UPnP)

Universal Plug and Play (UPnP) helps devices, such as Internet appliances and computers,
access the network and connect to other devices as needed. UPnP devices can
automatically discover the services from other registered UPnP devices on the network. With
UPnP, you can specify the following:
• Advertisement period. Specifies how often the gateway broadcasts its UPnP
information. The default is 30 minutes. Lower numbers ensure that control points
have current device status at the expense of more network traffic. Larger numbers
compromise the freshness of the device status but can significantly reduce network
traffic.
• Advertisement time to live. The time to live for the advertisement, measured in hops
(steps) for each UPnP packet that is sent. Hops are the steps a packet takes between
routers. The number of hops can range from 1 to 255. The default value for the
advertisement time to live is four hops, which should be fine for most home networks.
If you notice that some devices are not being updated or reached correctly, you might
need to increase this value slightly.

To configure UPnP:
1. In the main menu, under Advanced, select UPnP.
2. Select the Turn UPnP On check box.
NETGEAR DOCSIS 3.0 N450 Wi-Fi Data Gateway
Advanced Settings
45