3.
In the Utility list, select Ping.
4.
Specify the following parameters for the ping utility.
•
Target. The IP address of the ping target computer.
•
Ping Size. The size of the ping packet.
•
No. of Pings. The number of times to ping the target computer.
•
Ping Interval. The time between pings.
5.
Click Start Test.
The ping results display:
To stop a ping test:
Click Abort Test.
To clear the results from the display:
Click Clear Results.
NETGEAR DOCSIS 3.0 N450 Wi-Fi Data Gateway
Maintaining Your Network
32