Set Up Your Wireless Network; Configure Wireless Settings Manually - NETGEAR CG3000Dv2 User Manual

Set Up Your Wireless Network

To set up the wireless network, you can enter wireless settings, or you can use Wi-Fi
Protected Setup (WPS). To wirelessly connect to the gateway, a computer or wireless device
must be configured with the same wireless settings as the gateway.

Configure Wireless Settings Manually

You can manually configure the wireless settings and security in the Wireless Settings
screen.

To view or configure the wireless settings:
1. If you are located near the gateway, use an Ethernet cable to connect your computer to
the gateway while you are changing the wireless settings.
Note: If you connect wirelessly to the gateway and then change its
wireless network name (SSID) or wireless security, you will be
disconnected after you click Apply.
2. Log in to the gateway.
For more information, see
3. In the main menu, under Setup, select Wireless Settings.
The following screen displays.
NETGEAR DOCSIS 3.0 N450 Wi-Fi Data Gateway
Log In to Your Gateway
Configuring Your Wireless Network
13
on page 10.