Makita UT1200 Repair Manual page 3

UT1200
I. General
(a) The mixer should only be repaired by authorized service center. The following explanations are in
accordance with the spare parts list UT1200.
(b) To avoid electric shock, unplug the mixer from the power supply before
! Attempting any service!
II. Disassembly of Mixer
1. Motor Section
After disconnecting the machine from the main part, loosen four lens head screw
•
the gearbox housing incl. needle sleeve
19
Before continue disassembling, please make sure to remove grease as shown below for efficient
operation. Please apply grease while assembling the spare parts.
Pair of handle can be disassembled by unscrewing four self-tapping screw
screw (35). Open the pair of handle halves
(18)
3
18
(30)
34
35
30
from Motor Housing (3).
P 3/ 9
(19) and remove
(34) and one self-tapping