Set Up Port Filtering - NETGEAR Nighthawk MR5100C User Manual

• IP Address. Enter the IP address of the connected device.
• Port. Enter the port number or range of port numbers that the application uses.
• Protocol. If you are unsure, select TCP.
8. Click the ADD button.
Your settings are saved.

Set Up Port Filtering

You can select which applications (for example, HTTP, FTP, email servers) can access
the Internet. Used with other security measures such as a firewall, port filtering can
enhance network security.
To set up port filtering:
1. From a computer that is connected to your network, launch a web browser.
2. Enter http://mywebui.net or http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.
The password is case-sensitive.
The dashboard displays.
4. Select SETTINGS > Advance Settings > Port Filtering.
The Port Filtering page displays.
5. Select the Enable check box.
The Filter Type menu displays.
6. Select Block List or Allow List.
The ADD SERVICE page displays.
7. Enter the following port forwarding information:
• Service Name. Enter a descriptive name.
• Port. Enter the port number that the application uses.
• Protocol. If you are unsure, select TCP.
8. Click the ADD button.
Your settings are saved.
Control Internet Access
Nighthawk M5 5G WiFi 6 Mobile Router
47 User Manual