H Terminal Interface - ABB ACS 160 User Manual

H Terminal Interface

Use cable glands to ensure proper sealing, see I.
Note! The power supply input connectors are located in different places depending whether the unit
has a built-in RFI filter or not.
Note! DC voltage can be measured between R+ and X4-2.
Motor cable
earthing wire
connector
( , PE)
Units with built-in RFI filter
In units with built-in RFI filter, earthing wire (PE) connectors for motor and mains are located on the
filter baseplate.
PE, motor
cable earthing
wire connector
Motor cable
connector
ACS 160 User's Manual
Motor cable
connector, see O
(U2, V2, W2)
Motor PTC connector
(X4-1, X4-2)
Mains cable connector
PE, mains cable earthing wire connector
Brake resistor
cable connector
(
R-, R+)
Brake resistor
earthing wire
connector
(
, PE)
PE, mains
cable earthing
wire connector
Mains cable
connector
(
U1, V1, W1)
Control panel/
Serial link
connector
DIP switches
Main I/O
terminal, see K
11