Present System Status On Display And Printer (H4); Disablement (H4/U1) - Panasonic EBL512 Operating Instructions Manual

Panasonic Electric Works Fire & Security Technology Europe AB
MEW00748
26
26.1
Action
"Access"
Scroll to menu H4.
"A"
"A"
or
"1"
"Return"
or
"A"
Rev: 1
Present system status on display
and printer (H4)
A printer is factory mounted in control unit 1549. Printer 1558 is an
option for control unit 1548.

Disablement (H4/U1)

A list of all disablements in the system.
possible to get a print-out.
Text in display
Present system status on display and
printer
Disablement
Printout: (1=yes)
When "A" is pressed, the disablements will be shown in the
display. Some examples:
Zone XXX address XX disabled
B)
or
Zone XXX is disabled
B)
or
Alarm points are disabled by
time channel in CU XX
Printing started. To stop printing press
C and 0 simultaneously
Disablement
Printout: (1=yes)
A)
Disablements by time channel(s) are listed (one by one) in menu
H4/U2.
B)
On this row can also be shown adding information, e.g.:
•
Automatic re-enablement HH:MM
•
(by open door in CU xx)
Operating Instructions Fire alarm system EBL512 V2.3.x
ACCEPT? H4
A)
ACCEPT?
88
A)
From this menu, it is also
Comments
According to chapter
"Access", see page 72.
Press "1" for an automatic
print-out of all
U1
disablements in the
system.
Press "A" for presentation
in the display.
L = a list in which you can
scroll. If there are no
disablements and if
"Return" is pressed, menu
L
U1 will be shown again.
L
Press "A" and menu U1
will be shown again.
Scroll or press "Return" to
menu H4. Scroll or press
U1
"Return" to log off.