Writing Product Setting Information For The Product (Setting Change) (Common Settings, Enable F/R Lever Setting) - Makita FT Series User Manual

3-7. Writing Product Setting Information for the Product (Setting Change)
(Common Settings, Enable F/R lever Setting)
The product operation settings that can be changed are as follows.
Important! To transfer the settings to the product, after clicking the buttons or entering the values to set
the corresponding items and then click [Write] button of "Access to Tool". The product
settings will not change until you click the button.
Important! When you click [Write] of "Access to Tool", do not remove the USB cable until the message
of Settings Change Finish is displayed. Not only will the settings not be reflected, but the
product may also not work correctly.
If this happens, connect the product using a USB cable and complete writing the settings
again.
Setting item: "Common Settings"
1. "Lighting"
The product lighting can be set.
(When "Bright" or "Dim" is selected, the afterglow function operates interlocked with the trigger operation.)
 "Bright"
 "Dim"
 "OFF"
2. "Buzzer"
The buzzer sound can be set to "ON" or "OFF."
 "ON"
 "OFF"
3. "Brake (Switch OFF)"
The brake can be set to "ON" or "OFF" when the switch trigger is OFF.
 "ON"
 "OFF"
Important! You must click [Write] of "Access to Tool" to change the
product settings.
35