Cisco Rainier Satellite D9865 Quick Tips page 4

 RAINIER CHANNELS(Channel Groups) SETUP PARAMETERS:
 For Receiver Preset Setup Data Download our dataset.pdf
When changing between Subscription Channel Groups (Suites from different providers)
there can be a delay up to 15 minutes depending on server load before the receiver will
authorize for that new channel group. (most turn on sooner) This is NORMAL and how
the Cisco PowerVu rolling authorization system works. There is nothing wrong with your
receiver or subscription. If you want to watch something from a different group at a specific
time please adjust your tuning and viewing time schedule accordingly.
To acquire a new Rainier Channel Group (preset):
Set your Rainier Mover, 4DTV or analog receiver to the satellite degree position required and
proper Horizontal or Vertical polarity of the PowerVu Rainier preset channel group requested.
When that is done on theD9865H remote do the following.
Press:
Setup
Tuning/Preset
OK
Yellow
button (Preset) Preset
Number
OK
Enter Number (highlight)
OK
Blue button
(Activate) OK
Continue Acquiring
NetworkSuccess
Tune to channel (ie 102MAVTV, 1 NFL Network etc.) number of Rainier subscription channel
use channel up or down or direct entry buttons. You can also view channels in the suite by
pressing EPG.
If you fail to acquire the channel group, check and see if the satellite position is peaked
and the polarity is correct. If your system is tuned properly and working well, you
should easily acquire the channel group (suite).
Note: DVB S2 8PSK HD signals need to be spot on, make sure your dish alignment and LNB
are up to the task.