Installation Preparation; Removing The Freezer Door - Baumatic TITAN2 Instruction Manual

Installation preparation

IMPORTANT: A minimum of two people should
complete all of the installation steps given in this
manual.
o Check that the appliance will easily pass through all doorways en
route to its final position.
o Appliance dimensions: 1790 mm(h) x 900 mm(w) x 730 mm(d).
(including door handles).
o If your appliance will not fit through a doorway, then it is
possible to remove the fridge and freezer doors.

Removing the freezer door

If the front bottom cover has already been attached, then it should be
removed before attempting to remove the door.
1) Push down the left hand collar of the coupling first, and whilst
doing this, pull out the left hand water tube.
2) Unscrew the top hinge cover using a screwdriver. Insert a thin
screwdriver into the side groove of the cover to remove it.
30