Baumatic TITAN2 Instruction Manual page 27

4) Push the cover back into position and fully tighten the screws
that hold it in place.
Freezer section
The light bulbs can be found behind the light cover that is below the
top shelf.
4) Push the cover back into position and fully tighten the screws
that hold it in place.
3) Change the present light bulb with a new
one. The replacement bulb should not
have a greater rating than 15 W.
1) Remove the screws that hold the light
cover in place.
2) Hold the bottom of the cover and pull it
forward to remove it.
3) Change the present light bulb with a new
one. The replacement bulb should not
have a greater rating than 15 W.
27