Replacing The Light Bulb - Baumatic BR16.3A Instruction Manual

Larder fridge
Table of Contents

Advertisement

o The evaporating tray and defrost water drain hole should be
cleaned periodically with the defrost drain plug. This will prevent
water from collecting in the bottom of the refrigerator, instead of
flowing down the defrost drainage channel and drain hole.
o You can also pour a small amount of water down the drain hole
to clean inside of it.
o You should be careful to make sure that food packages do not
touch the rear wall of the appliance, as this can interrupt the
automatic defrosting process and deflect water into the base of
your refrigerator.

Replacing the light bulb

WARNING: PLEASE ENSURE THAT YOUR
APPLIANCE IS DISCONNECTED FROM
YOUR MAINS SUPPLY BEFORE
ATTEMPTING TO REPLACE THE LIGHT
BULB.
o Press the hooks on the sides of the light cover and slide the
cover off.
o Change the present light bulb with a new one. The replacement
bulb should not have a greater rating than 15 W.
o Replace the light cover and after waiting five minutes, reconnect
your plug to your mains supply.
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents