How To Reverse The Door Swing - Baumatic BL280 Instruction Manual

REVERSING THE DOOR OPENING (swing of the door):
Remove the two screws (1) joining
1)
the top panel (5) to the cabinet.
Take away the top panel (5) by
2)
pulling it towards the front.
Remove the screws (6) which fix
3)
the steel plate (10).
Take away the steel plate (10) and
4)
lift the door. Put the door on a soft
surface to keep it from getting
scratched.
Remove the two screws (8) that
5)
hold the lower hinge (2) and make
sure to remove the lower hinge (2)
Take off the front left leg (4) and
6)
transfer it to the right side.
Before placing this lower hinge (2),
7)
remove the bolt-pin (9) and
reverse the direction of the lower
hinge (2). Then install the lower
hinge (2) onto the left side of the
lower frame with two screws (8).
Insert the bolt-pin (9) into the lower
8)
hinge (2).
Take off the upper hinge (7) on the
9)
right hand side of the steel plate (10)
and install the upper hinge (7) on the
left side of the steel plate (10).
Set the door in place making sure
10)
the door seats into the lower hinge
(2).
While holding the door closed, put
11)
the upper hinge (7) into the door
hinge hole and secure the steel plate
(10) in the top frame with the screws
(6). Please remember not to tighten
the screws (6) until the top of the
door is levelled with the counter top.
Insert the front edge of the top
12)
panel (5) into the steel plate (10) and
fix the top panel (5) onto the top of
the cabinet with two screws (1).
14