1. Manuals
  2. Brands
  3. Baumatic Manuals
  4. Refrigerator
  5. BL18A
  6. Instruction manual

Baumatic BL18A Instruction Manual

Built under larder fridge
Hide thumbs
Table of Contents

Advertisement

Quick Links

BL18A Built under
larder fridge
33U d

Advertisement

Table of Contents
loading

Related Manuals for Baumatic BL18A

Summary of Contents for Baumatic BL18A

  • Page 1 BL18A Built under larder fridge 33U d...
  • Page 2 USER MANUAL FOR YOUR BAUMATIC BL18A Built under larder fridge NOTE : This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference. for you or any person not familiar with the operation of the appliance.

  • Page 3: Table Of Contents

    Specifications of your larder fridge Description of the appliance Description of the product features 8 - 9 Using your Baumatic larder fridge Before switching on During first use Turning on the appliance and setting the thermostat Arranging and storing food in your refrigerator...

  • Page 4: Environmental Note

    Environmental note Note : Before discarding an old appliance, switch off and disconnect it from the power supply. Cut off and render any plug useless. Cut the cable off directly behind the appliance to prevent misuse. This should be undertaken by a competent person. Disable the door lock to make sure that children cannot get stuck inside the appliance.

  • Page 5: Important Safety Information

    Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Baumatic Advice Line.
  • Page 6 Child safety o Packaging material should be kept away from children. o Children should not be allowed to touch the controls or play with the appliance. General safety o Do not pull on the power supply cable to remove the plug from your mains supply socket.

  • Page 7: Specifications Of Your Larder Fridge

    Specifications of your larder fridge Congratulations on purchasing a Baumatic larder fridge. o Automatic defrost o Adjustable thermostat o Egg racks o 2 safety glass shelves o Salad crisper o Reversible door o Adjustable feet Dimensions of appliance Height: 820 mm...

  • Page 8: Description Of The Appliance

    Description of the appliance Description of the product features 1) Shelves o The shelves may be placed in any of the guide slots within the interior of the appliance. They are protected from sliding out. o To remove a shelf: Take off all of the items that are stored on the shelf that you want to remove.
  • Page 9 2) Defrost water outlet o The interior of the refrigerator is cooled by the cooling plate that is on the rear wall. Beneath this there is a channel and an outlet for the defrost water. o It is important that this channel never becomes clogged (see “Defrosting the refrigerator compartment”...

  • Page 10: Using Your Baumatic Larder Fridge

    Using your Baumatic larder fridge Before switching on o Make sure that it has been installed by a suitably qualified person, as per the information contained in Baumatic’s installation instructions. o After delivery, wait for eight hours before connecting the appliance to your mains supply.

  • Page 11: Turning On The Appliance And Setting The Thermostat

    Turning on the appliance and setting the thermostat You switch on your appliance by connecting it to your mains supply and setting the thermostat. The thermostat control knob is located on the right hand side of the fridge. o The thermostat automatically regulates the temperature inside of the fridge, depending on what number you have turned the thermostat control knob to:- o Position <0>...

  • Page 12: Arranging And Storing Food In Your Refrigerator

    Arranging and storing food in your refrigerator o Warm food or evaporating liquids should not be stored in your refrigerator, as this will increase the humidity inside of the appliance. o All foods should be wrapped or covered, this is particularly important if the food has a strong flavour.

  • Page 13: Cleaning And Maintenance

    Cleaning and maintenance WARNING: PLEASE ENSURE THAT YOUR APPLIANCE IS DISCONNECTED FROM YOUR MAINS SUPPLY BEFORE ATTEMPTING TO CLEAN IT. o Do not clean the appliance by pouring water onto it or spraying water over it. o The refrigerator compartment should be cleaned periodically, using a solution of bicarbonate of soda and lukewarm water.

  • Page 14: Replacing The Light Bulb

    o The evaporating tray and defrost water drain hole should be cleaned periodically with the defrost drain plug. This will prevent water from collecting in the bottom of the refrigerator, instead of flowing down the defrost drainage channel and drain hole. o You can also pour a small amount of water down the drain hole to clean inside of it.

  • Page 15: Installation

    Installation IMPORTANT: Before installation and usage read all the instructions and make sure that the voltage (V) and the frequency (Hz) indicated on the rating plate are exactly the same as the voltage and frequency in your home. The rating plate can be found on the front left edge of the inside of the refrigerator.

  • Page 16: Positioning

    Positioning o It is advisable that your appliance is only installed in a location where the ambient temperature of the room, corresponds with the climate classification that is stated on the rating plate of your appliance. Your appliance may not function correctly if the ambient temperature falls outside of the following ranges.

  • Page 17: Adjusting The Height And Levelling Off Your Larder Fridge

    Adjusting the height and levelling off your larder fridge 2) Place the larder fridge into the aperture. The height and level of the appliance should then be adjusted so it sits properly under the worktop. o Locate the 4 rotating, levelling feet on each corner of the appliance.

  • Page 18: Installing Your Refrigerator

    Installing your refrigerator If you need the appliance door to open from the other side, then please reverse the door before commencing the installation process. (See “Reversing the door section”). Tools required:- o Tape measure o Sharp pencil o Small flat bladed screwdriver o Spanner o Bradawl o Drill...
  • Page 19 5) Measure the distance between the two screw holes on the top of the fridge door. 6) Draw a line that is the length of that measurement (D) on the rear of the furniture door. This line should be drawn at the point that you marked in step 4.
  • Page 20 8) Using the screws provided, secure the front brackets to the inside of the furniture door on the holes that you have just drilled. IMPORTANT: These screws must be securely tightened. 9) Tighten the upper retaining bolts to the top of the appliance door.
  • Page 21 11) Rehang the furniture door and make the same adjustments that you made in step 9. o Tighten the retaining nuts at the top of the appliance door. o Secure the bottom of the furniture door to the appliance door, using the two fixing brackets, tightening screws into the two holes that you made in step 10.

  • Page 22: Adjusting The Plinth/Kickboard

    Adjusting the plinth/kickboard When the appliance has been fitted, you may decide to attach a plinth or kickboard to match your existing kitchen units. o Remove the grid on the base of the fridge by releasing the fastenings just inside of the grill on each side. Then pull the grid towards you.
  • Page 23 2) With the door closed, remove the screws on the outside of the hinges. o You should start with the top hinge first. 3) Carefully open the hinges away from the appliance d oor. 4) Remove the door from the main body of the appliance.
  • Page 24 7) Turn the hinge over and place it on the diagonally opposite corner of the cabinet. o Securely screw it into place. 8) Repeat steps 5 - 7 on the remaining hinge (i.e. remove it and attach it to the diagonally opposite corner). o Replace the cabinet blanking plates.

  • Page 25: Troubleshooting

    Troubleshooting IMPORTANT: If your refrigerator appears not to be operating properly, before contacting the Customer Care Department, please refer to the checklist below. My fridge does not appear to be working/there is no power to my appliance. o Check that the plug is fully inserted into the power socket. o Check that there is power to your mains supply (e.g.
  • Page 26 Or any installation other than the one specified by Baumatic Ltd. has been completed. Please refer to the conditions of guarantee that appear on the...

  • Page 27: Contact Details

    Czech Republic United Kingdom Baumatic CR spol s.r.o. Baumatic Ltd., Amperova 495 Baumatic Buildings, 46215, Librec 6 Bennet Road, Czech Republic Reading, Berkshire RG2 0QX +420 800 185 263 United Kingdom www.baumatic.cz Sales Telephone (0118) 933 6900 Slovak Republic Sales Fax Baumatic Slovakia, s.r.o.

Table of Contents