How To Reverse The Door Swing - Baumatic BF150 Instruction Manual

REVERSING THE DOOR OPENING (swing of the door):
Ensure there is sufficient space behind the cooling
coils at the back of your Fridge – 12.7cm (5") is ideal!
Remove the screws (6) which fix
1)
the steel plate (10).
Take away the steel plate (10) and
2)
lift the door. Put the door on a soft
surface to keep it from getting
scratched.
Remove the two screws (8) that
3)
hold the lower hinge (2) and make
sure to remove the lower hinge (2)
Take off the front left leg (4) and
4)
transfer it to the right side.
Before placing this lower hinge (2),
5)
remove the bolt-pin (9) and
reverse the direction of the lower
hinge (2). Then install the lower
hinge (2) onto the left side of the
lower frame with two screws (8).
Insert the bolt-pin (9) into the lower
6)
hinge (2).
Take off the upper hinge (7) on the
7)
right hand side of the steel plate (10)
and install the upper hinge (7) on the
left side of the steel plate (10).
Set the door in place making sure the
8)
door seats into the lower hinge (2).
While holding the door closed, put the
9)
upper hinge (7) into the door hinge
hole and secure the steel plate (10) in
the top frame with the screws (6).
Please remember not to tighten the
screws (6) until the top of the door is
levelled with the counter top.