Table of Contents
Advertisement
The green and yellow wire must be connected to the terminal
marked "E" (earth), or by the earth symbol, or coloured green
and yellow.
o When the connection is completed, no stray strands or cut wire
should be present. The cord clamp must be secured over the
outer sheath.
Reversing the door swing
o You can choose whether you want the doors of your appliance to
open from the left or the right according to your kitchen design
or personal preference.
o It is important that this procedure is carried out before the
fridge-freezer
appliance should not be connected to the mains supply.
o The door reversal process should only be carried out by a
suitably qualified person. It is recommended that 2 people
handle the fridge-freezer during assembly. All parts that are
removed should be saved for reinstallation.
o The fridge-freezer should be rested on something solid so that it
will not slip during the door reversal process. Do not lay the
fridge-freezer flat as this may damage the coolant system.
1) Carefully tilt the fridge freezer to allow access to the bottom of
the freezer door. This requires 2 people to avoid damage or
injury.
cushioned surface.
is
positioned
in
2) Rotate the left and right
3) Unscrew the bolts that are
4) Use the narrow head of a
the
desired
location.
adjustable feet in an anti-
clockwise direction by hand.
used to fix the bottom hinge
with the wide head of a
spanner. Then unscrew the
bottom
hinge
screwdriver
and
remove
the
freezer
Place
the
door
spanner to unscrew the hinge
pin and stopper and place
The
with
a
carefully
door.
on
a
22
Advertisement
Table of Contents
