Loading Salt Into Salt Container - Baumatic BFD47SS Instruction Manual

BAUMATIC BFD47SS dishwasher user manual
on chemicals
Note
• Your dishwasher is equipped with an adjustable rinse aid and salt container. Using individual detergents,
rinse aid and salt will give the best possible results as this will give the correct dosage of each chemical to
suit your needs. Using Two-in-One or Three-in-One tablets may not give the best results when used in
your appliance, and may not be suitable for the type of water supply in your home, as they contain pre-
determined quantities of salt, rinse aid and detergent and cannot be adjusted to the individual
requirements.
If you are going to use 3-in-1 (or 2-in-1) tablets, we suggest that you contact the manufacturer before use
or if you experience poor results in the wash performance and ask for assistance from them.
WATER
SOFTENING
FEATURE
THE LIME IN HARD WATER MAKES DEPOSITS FORM ON
DISHES AND UTENSILS. YOUR DISHWASHER HAS A
SPECIAL SOFTENING FEATURE THAT USES SALT
SPECIFICALLY DESIGNED TO ELIMINATE LIME AND
MINERALS FROM THE WATER
LOADING SALT INTO THE SALT CONTAINER
REMOVE THE LOWER BASKET & THEN
•
UNSCREW AND REMOVE THE CAP
FROM THE SALT CONTAINER.
IF YOU ARE FILLING THE CONTAINER
•
FOR THE FIRST TIME, ,FILL 2/3 OF IT'S
VOLUME WITH WATER
(AROUND500ML).
PLACE THE END OF THE SUPPLIED
•
FUNNEL INTO THE HOLE & ADD 1.2 Kg
OF SALT. NOTE: IT IS NORMAL FOR A
SMALL AMOUNT OF WATER TO COME
OUT OF THE CONTAINER.
USUALLY:THE WARNING LIGHT WILL
•
BE OFF IN 2-6 DAYS AFTER THE SALT
CONTAINER BE FILLED WITH SALT.
used by the dishwasher
NOTE:
IF YOU USE 3-IN-1 OR 2-IN-1 TABLETS, BE
SURE NOT TO ADD SALT AND/OR RINSE AID
TO THE APPLIANCE AS THESE TABLET
TYPES ALREADY CONTAIN SALT AND/OR
RINSE AID. ADDING SALT AND RINSE AID
TO YOUR DISHWASHER'S COMPARTMENTS
IN A CYCLE INVOLVING A 3-IN-1 OR 2-IN-1
TABLET WILL RESULT IN OVERDOSING OF
.
INDIVIDUAL CHEMICALS AND MAY CAUSE
OVERFLOWING OF WATER AND SUDS.
5
WARNING!
ONLY USE DISHWASHER SALT IN YOUR
5
DISHWASHER.