Starting A Wash Cycle - Baumatic BFD47SS Instruction Manual

BAUMATIC BFD47SS dishwasher user manual

STARTING A WASH CYCLE

1) MAKE SURE THAT THE PLUG OF THE
APPLIANCE IS INSERTED INTO THE
WALL SOCKET.
2) MAKE SURE THAT THE WATER SUPPLY
IS TURNED ON TO FULL PRESSURE.
3) LOAD THE DISHWASHER (SEE THE
SECTION ENTITLED 'LOADING YOUR
DISHWASHER').
4) POUR IN DETERGENT (SEE THE
SECTION ENTITLED 'SALT, DETERGENT
& RINSE AID').
* REMEMBER *:
ADVANCE BY PRESSING THE DELAY BUTTON MULTIPLE TIMES UNTIL THE DESIRED DELAY
HAS BEEN SET. EACH PRESS SETS THE START TIME FORWARD BY 30 MINUTES.
What you w
washing cycle you will see the temperature displayed as well as the number
of minutes the washing cycle has left to run.
• Digital sign: shows the delayed time, remaining
time and fault codes.
• Delay sign: shows this when delaying.
• Washing sign: shows this when washing.
• Running sign: repeatedly shows this sign in turn
when running. Does not flicker when stopping.
• Temperature display: displays the wash
temperature at any time.
Approximate Timing of Wash Cycles
Intensive
126
(strong)
mins.
YOU CAN PROGRAM YOUR DISHWASHER UP TO 12 HOURS IN
ill ee displayed s
Normal Economy
114 90
mins. mins.
5) TURN THE KNOB LOCATED ON
THE RIGHT OF THE CONTROL
PANEL CLOCKWISE UNTIL THE
DIAL POINTS TO THE SYMBOL
FOR THE CYCLE SETTING.
SEE THE 'WASH CYCLE TABLE'
ON THE NEXT PAGE.
6) PRESS THE ON/OFF BUTTON –
THE ON/OFF LIGHT WILL
TURN ON. AT THIS POINT,
THE WASH CYCLE WILL BEGIN.
:
Note that when you start a
Rinse
48
mins.
12
12
Glass Rapid
51 40
mins. mins.
Soap
7
mins.