Honeywell EkoFlush-K572 User's Operating Manual page 9

Picture 6 - Solvent front sight-glass distmantled
After dismantling the upper part (No. 2, 3, 4), withdraw the blocking spring (No.4) and
dismantle all single parts (No.2, No.3 and No.4) and clean them, together with the
interior of the sight glass (No. 1).
CLEANING THE P48 FILTER
The cleaning of the P48 Filter is extremely simple:
- Open the external cartridge by unscrewing it
- extract the inner metal filter,
- blow it with compressed air or brush it
- put the filter back in its original position and close the cartridge.
NOTE: The metal filter inside the cartridge has an infinite life. In case it's heavily clogged, you
can wash it with solvent.
7.5 After completing the flushing, it may happen (for many reasons) that the final pressure in the
cylinder is lower and that the quantity of recuperated SOLSTICE
start. If a cylinder of an appropriate size has been chosen for the flushing operation, in absence
of unexpected leaks, the quantity of the solvent should be sufficient to perform 20 cleanings.
Please consult your solvent supplier in case of problems.
WARNING!
A high loss of SOLSTICE
®
PF-C can indicate a problem of leakage in the flushed circuit.
- 9 -
®
PF-C is also less than at