Flushing Procedure - Honeywell EkoFlush-K572 User's Operating Manual

7. Device flushing procedure
Low Pressure
(from circuit)
Pos.16
OUTLET HOSE
with Valve
OUTLET HOSE
(from circuit)
with Valve
Low Pressure
Pos.16
Particles Filter
P48
7.1 Ensure that the connections of all the hoses are tight (see chapter 6).
7.2 Open all valves both on the solvent cylinder and on the hoses.
Picture 5 here above describes the cylinder before and after the completion of the flushing
procedure.
Blue
Picture 3 - Cylinder of Solstice®
PF-C
Manometers
Sight
Glasses
Outlet Inlet
Pos.6 Pos.7
Picture 4 - K572 Control panel
Picture 5 - K572 Control panel with hoses
- 7 -
Red
High Pressure
(from cylinder)
Pos.13
INLET HOSE
with Valve
Main Switch
Pos. 31
High Pressure
Pos.13
Main Switch
Pos. 31
INLET HOSE
(to circuit)
with Valve
Sight Glass IN
(to circuit)