Installing The Nebulizer - Philips V60 User Manual

Setting up the ventilator for use
5-4
Assemble the patient circuit, including the main flow (inspiratory) bacteria
filter, proximal pressure line, oxygen sensor tee, and if desired, humidifier and
nebulizer.
Figure 5-1 shows the circuit configuration for noninvasive ventilation or high flow
therapy. For details on high flow therapy setup, see "High flow nasal cannula
setup" on page 7-2.
Figure 5-2 and Figure 5-3 show circuit configurations for noninvasive and
invasive ventilation. Follow the manufacturers' instructions for use for the
individual parts.

Installing the nebulizer

For installation of the Aerogen nebulizer. follow the manufacturer's
instructions that came with the nebulizer, or visit:
www.aerogen.com/nebulization-product-support