First-time installation
Mounting the
ventilator
A-2
CAUTION:
To prevent possible damage to the ventilator, always secure it to its
stand or securely place it on a flat, stable surface that is free of dirt
and debris. Do not use the ventilator adjacent to, or stack it with,
other equipment.
NOTE:
If you mount the ventilator to a stand, make sure the stand is
approved by Philips.
The ventilator may be mounted to the optional stand or placed on a flat,
stable, clean surface. Figure A-2 shows the installed ventilator.
Align the ventilator above the stand as shown in Figure A-1. Make sure the four
feet at the base of the ventilator are aligned to slide into the grooves at the top
of the stand. Ensure that the locking lever on the back right of the stand locks
into place.
Figure A-1: Mounting the V60/V60 Plus Ventilator on the stand