Makita DUR187U Original Instructions Manual page 11

Installing the guard
WARNING:
Never use the tool without the
guard illustrated in place. Failure to do so can
cause serious personal injury.
CAUTION:
Take care not to injure yourself on
the cutter for cutting the nylon cord.
NOTE: The shape of the protector varies depending
on the country.
1. Align the projections on the protector with the
grooves of the motor housing.
1
3
1
► 1 . Protector 2. Groove 3. Projection
2.
Align the projections on the protector holder with
its counter parts of the motor housing.
1
► 1 . Protector holder 2. Projection
3. Tighten the hex socket head bolts securely to
fasten the protector and the protector holder.
2
2
3
2
1
► 1 . Hex socket head bolt 2. Hex wrench
Installing the wire guard
CAUTION:
Before adjusting the wire guard,
wait for the cutting head comes to standstill. Do
not adjust the wire guard with your foot.
To reduce the risk damaging the objects in front of the
cutting head, insert the wire guard so that it controls the
cutting range of the mowing line.
Slightly expand the wire guard outward and then insert
it into the holes of the protector.
11 ENGLISH
2
1
2