Makita SD100D Instruction Manual
Cordless drywall saw
Hide thumbs
Also See for SD100D:
- Instruction manual (60 pages) ,
- Instruction manual (32 pages) ,
- Instruction manual (49 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita SD100D
Summary of Contents for Makita SD100D
- Page 1 INSTRUCTION MANUAL Cordless Drywall Saw SD100D Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: SD100D Length of stroke 6 mm Strokes per minute 0 - 6,000 min Maximum cutting capacities Drywall 30 mm Wood 15 mm Rated voltage D.C. 10.8 V - 12 V max Overall length 239 - 248 mm (Depending on the battery) Net weight 1.4 - 1.6 kg... -
Page 3: Ec Declaration Of Conformity
Do not expose power tools to rain or wet con- NOTE: The declared vibration total value(s) has been ditions. Water entering a power tool will increase measured in accordance with a standard test method the risk of electric shock. and may be used for comparing one tool with another. Do not abuse the cord. - Page 4 Battery tool use and care Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. Use power tools only with specifically desig- nated battery packs. Use of any other battery packs may create a risk of injury and fire.
- Page 5 Makita warranty for the Makita tool and charger. Important safety instructions for Tips for maintaining maximum...
-
Page 6: Functional Description
Battery protection system FUNCTIONAL DESCRIPTION The tool is equipped with a battery protection system. This system automatically cuts off power to the motor to extend battery life. CAUTION: The tool will automatically stop during operation if the Always be sure that the tool is tool and/or battery are placed under one of the following switched off and the battery cartridge is removed conditions:... -
Page 7: Adjusting Depth Of Cut
Switch action Adjusting depth of cut The cutting depth corresponds with the scale on the blade. Loosen the screw on the blade holder until the blade can move freely. Align the scale on the blade with the bottom line of the blade holder. Then tighten the screws. - Page 8 Replacing drywall saw blade ASSEMBLY CAUTION: Always clean out all chips or for- CAUTION: Always be sure that the tool is eign matter adhering to the blade and/or blade switched off and the battery cartridge is removed holder. Failure to do so may cause insufficient tight- before carrying out any work on the tool. ening of the blade, resulting in a serious personal injury.
- Page 9 Installing snap-off blade Attaching blade cap CAUTION: CAUTION: Always use the snap-off blade with Always attach the blade cap when designated length, width, and thickness. An inap- tool is not used. A bare blade may cause personal propriately installed snap-off blade can be broken. A injury or damage to the blade itself.
-
Page 10: Operation
Align the bottom of the V-notch in the front edge Connect a Makita vacuum cleaner for clean operation. with the cutting line. Remove the rubber cap on the dust collector and con- nect the vacuum cleaner's hose to the nozzle of the dust collector. -
Page 11: Optional Accessories
Perform the cleaning periodically. Dirty base cover may damage or deface the working surface. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. - Page 12 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885530B226 www.makita.com 20190124...