Install Base System - GE LOGIQ 7 Service Manual

GE H
EALTHCARE
D 2286865, R
IRECTION EVISION
8-2-7

Install Base System

Before starting to install base system, all printer must be disconnected from the system.
NOTICE
1.) Power OFF the scanner, wait more than 5 seconds, then power ON the scanner.
2.) Open the DVD drive and set the Ghost DVD.
DVD drive reads Ghost DVD automatically and go to next step.
3.) After loading software, when the following screen appears, press the Enter key.
8-14 Section 8-2 - Software Loading Procedures for BT09 (R8.x.x or later)
14
Figure 8-64 Enter
LOGIQ™ 7 S M
ERVICE ANUAL