Option 1: Recover The Server From A Backup; Step 1: Boot Into System Recovery Mode; Step 2: Reimage The Os To A Backup Image - Hitachi HCP Anywhere Edge On-Site Setup And Recovery

Option 1: Recover the server from a backup

Option 1: Recover the server from a backup
If your server becomes corrupted, you can use System Image Recovery to
restore the entire HCP Anywhere edge appliance, including the data on the
edge device, to a point in time before it was corrupted.
To recover the HCP Anywhere edge appliance:
1. Boot into system recovery mode
2. Reimage the OS to a backup image
3. Verify the edge device

Step 1: Boot into system recovery mode

To boot into system recovery mode:
1. Power on the node and hold F8 on the keyboard.
2. In the Boot Menu, select Repair Your Computer .
3. In the Choose an option window, select Troubleshoot .
4. In the Advanced options window, select System Image Recovery .

Step 2: Reimage the OS to a backup image

To reimage the OS to a backup image:
1. Optionally, select Select a system image if you want to restore to an
earlier backup.
2. In the Re-image your computer wizard , click Next .
3. In the Choose an additional restore options page in the wizard, click
Next
4. In the Confirmation page of the wizard, click Finish .
5. In the popup menu, click OK .
36
HCP Anywhere Edge Appliance On-Site Setup and Recovery
.
Chapter 4: Recovering the HCP Anywhere edge appliance